中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

MXN MEMS 光开关

Features

Proven MEMS durability and reliability
Compact Form Factor
TTL UART interface
Qualified to Telcordia GR-1073-CORE and RoHS

Applications

Optical path selection
AsAutomatic optical distribution rack

现在查询

类别

热门产品

产品详细信息

M x N MEMS Optical Switch OXC

M x N MEMS Optical switch is used in optical cross-connect, OXC application. It’s also called Matric Optical Switch. It allows channel selections between M input fibers and N output fibers.

FIBERWDM’s MEMS Modular Single-Mode OXC is based on industry proven, long-life, reliable MEMS 1xN optical switch components. Each MxN OXC consists of M 1xn OSW and N 1xm OSW.

Product Configurations

Note: M*N requires less than 1024.

Optical Specifications

PARAMETER		VALUE	UNIT	NOTE
Wavelength		1290~1330 1525~1568 1600-1650	nm	Or customer specify
Test Wavelength		1310/1550/1625 or 1650	nm
MxN		8x8/8x16/16x16/16x32		M*N≤1024
Insertion Loss	4x4	≤1.4 @S	dB	@CWL,23°C Without Connectors @S: 13 or 15 or 16 @D: 13&15 or 15&16 (if with connectors or support @D, IL increased by 0.4dB)
	4x8	≤1.6 @S
	8x8	≤1.8 @S
	8x16	≤1.9 @S
	12x12	≤2.0 @S
	16x16	≤2.0 @S
	16x32	≤2.3 @S
	24x24	≤2.5 @S
Return Loss		≥45	dB	Or customer specify
Repeatability		≤0.1	dB
Crosstalk		≥50	dB	Or customer specify
Polarization Dependence Loss		≤0.4	dB
Wavelength Dependence Loss		≤0.6	dB	@CWL±20nm, 23°C
Temperature Dependence Loss		≤0.8	dB
Switch Time		≤15 @16x16 ≤25 @24x24	ms	A set of configuration link Eg: M1-N12
Durability		≥1x10⁹	cycle
Maximum optical Power		≤500	mW

Electrical and Mechanical Specifications

PARAMETER	VALUE	UNIT	NOTE
Switch Mode	Non-latching
Control Voltage	12	V	Module
Dimension	150×150×20 @8x8 200x180x18 @16x16 200x180x18 @8x24 312x180x30 @24x24	mm	Module

Environmental conditions

PARAMETER	VALUE	UNIT	NOTE
Operation Temperature	-5~65	°C
Storage Temperature	-40~85	°C
Operation Humidity	5~95	%RH
Storage Humidity	5~95	%RH

Pigtail and connector type/length

PARAMETER	VALUE	UNIT	NOTE
Fiber Type	G657A2 or G657B3 250um bare fiber
Fiber Pigtail(All Ports)	250um fiber or 900um loose tube
Fiber Length(All Ports)	1.00±0.05	m	Or customer specify
Optical Connector(All port)	None		Or customer specify

MECHANICAL DRAWINGS

8x8 OXC MEMS Optical Swtich

16x16 OXC MEMS Optical Swtich

24x 24 OXC MEMS Optical Swtich

相关产品

MEMS VOA 可调衰减器

Product Features Low insertion loss Low polarization dependent Compact size Available in both normally open and normally closed states Excellent reliability Product Application Power Management Receiver protective Channel Balance Instrumentation

1XN MEMS 光开关

Features Proven MEMS durability and reliability Compact Form Factor Fast switching time Qualified to Telcordia GR-1073-CORE and RoHS Applications Opticalsignal switching androuting Optical network protection and restoration Optical path monitoring (Workingwith OTDR or OCM) Instrumentation resource sharing

2x4 机械式光开关

Features Unmatched Low Cost Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path Applications Channel Blocking Configurable Add/Drop System Monitoring Instrumentation

4组1X2光开关光切换光选路光矩阵设备

具有插入损耗小，切换速度快等特点。光开关内部电路自检测，故障报警告知。支持RJ45和RS-232两种通信方式。采用 LCD 显示屏,非常直观的显示光路状态,方便用户的操作。可通过按键和串口、网口发送指令控制光路切换设置。并可通过串口指令锁定按键操作。

100Gb/s QSFP28 DWDM Dual CS Adaptor Transceiver

100G QSFP28 DWDM optical transceiver module, support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions.

光网络镜象流量复制设备OTAP

低插损，不影响数据流量包。无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠安装和操作简单，非专业人士即可独立完成。 4个OTAP端口，支持2路主链路串接，并把每条双芯主链路的流量100%复制成3份数据。成本低，集成度高，最多可集成16个OTAP端口，支持8路主链路流量复制

25G SFP28 DWDM Optical Transceiver

25G SFP28 DWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

SFP 1.25G TX 1490 RX 1550 CWDM 180KM DDM 光模块

Features: Up to 1.25Gb/s Data Links Hot-Pluggable Single LC connector Up to 180km on 9/125μm SMF 1490nm DFB laser transmitter APD Receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Power dissipation<1.5W operating temperature range: 0°C to 70°C RoHS compliant and Lead Free Applications: 1000Base-ZX Ethernet Metro/Access Networks 1×Fibre Channel Other Optical Links

联系我们